Key Feature

˙Directly display through your PC's USB port.
˙Various kinds of ports(USB/AV/VGA)fit for various external devices.
˙Super longer bulb life,repeated use for 20.000hours.
˙Adjusted project dimension and distance.
˙Compact,Lightweight,Energy saving,Noiseless.
˙Directly display with build-in battery.

Picture

Specifications

Turn on time	3S
Technology	LCOS
Resolution	640x480
Luminance	12 lumin
Contrast	200:1
Image Aspect Ratio	4:3
Projection Distance	less than 2.5m
Projection Dimension	less than 50inch
Dimension(for reference)	130(length)x50(width)x22(height)mm
Weight(for reference)	156g
Power Consumption	Less than 8W
LED life	20,000 hour
Port	USB/AV/VGA
Noise	none
Temperature/Humidity	interior temperature 0~45°humidity0~90%
Power supply	adapter,1300mAH chargeable battery,charge by USB port
Battery	1300mAH rechargeable li-ion battery.Full charge takes 3~4 hours and could use for 50~70 minutes.

Operation System Requirement

1.Pentium III compatible processor 800MHZ

2.Minimum 128MB RAM

3.Graphics card with minimum 16MB memory

4.512MB free HD space

5.CD-ROM driver(driver installation)

6.Operating System comes with Direct X9

User Manual

l How to use the power adaptor for charging

n Connect the charger (refer to the following picture)

n When charging the battery, the LED indicator turns on.

n The LED indicator will go off when the battery is fully charged.

l Basic Operations

n Connecting the projector to AV device.

u Connecting both the AV device and the projector (refer to the picture below)

u Press the power button

u Adjust the focus wheel till the image clear

l Connecting the projector to VGA device

n Connecting both the VGA device and the projector(refer to the picture below)

n Press the power button

n Adjust the focus wheel till the image clear.

l Connecting the projector to your Laptop PC

n Install the USB driver to your Laptop PC

l Connecting the projector to the Laptop PC’s USB port to display the image.

n Turn on the projector (Please connect the USB cable first , then turn on the projector)

n Adjust the focus wheel till the image clear.

l Make the projector stability

n Use the tripod stand to fix the projector